CALIBER PRO SERIES SPECIFICATIONS:

SMALL (11X18): 10.25 lbs (4.64 kg)

MEDIUM (15X25): 11.28 lbs (5.11 kg)

LARGE (20X30): 13.75 lbs (6.01 kg)

TECHNICAL SPEC PAGE CLICK HERE

Caliber Armor Shield – PRO Series includes arm strap, padding & pivoting bracket all pre-mounted, but can be adjusted to be held in right or left hand.

GENERAL INFORMATION

Caliber Armor IIIA Shield – PRO IIIA Series design made with ultra-hard alloy. Multi-shot rated. Finished with a polyurea coating. Made in the U.S.A

CALIBER ARMOR BALLISTIC RESISTANCE TESTING PROTOCOL:

All testing was conducted on an indoor range at ambient conditions, in accordance with our instructions and the modified provisions of:

NIJ-STD-0101.06, NIJ-STD-0101.07 HG2 & Special Threats. Testing was conducted using caliber .44 mag SJHP, .357 SIG, .44 mag JHP, and 9mm FMJ. Special Threat .357 magnum 158gr JSP, .44 mag 240gr SWCG, 9mm LCD, .45 ACP 230gr, FN 5 7×28 40gr SS197 and 7.62×25 Tokarev 85gr FMJ. The sample was tested in accordance with NIJ-STD-0101.06 Level IIIA in an indoor range with the muzzle of the test barrel mounted 50 feet from the target and positioned to produce 0-degree obliquity impacts. Four Oehler model 57 infrared velocity light screens, in conjunction with two HP 5315A time-based frequency counters, were placed such that projectile velocity was measured 8.25 feet from the target.

NIJ STANDARD 0101.06 IIIA & NIJ STANDARD 0101.07 HG2 Tested and verified to meet ballistic resistance as specified under NIJ Standard- 0101.06 IIIA & NIJ Standard – 0101.07 HG2 plus special threat tested.

DISCLAIMER

The information contained in this document is intended solely to provide general guidance. The right is reserved to make changes to this document without notice at any time. Nothing in this document (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment.

EXPORT CONTROL ADVISORY

Model PRO IIIA SERIES is subject to the Export Administration Regulations (EAR). It may not be sold or otherwise provided to any non-U.S. Person and/or exported or re-exported without a valid U.S. Department of Commerce BIS Export License, or applicable EAR license Exception.

QUALITY STANDARDS

Caliber Armor operates a documented quality management system to ensure the highest caliber armor available. Raw materials are tested prior to production and finished products are tested in credited ballistic laboratories.

Discounts - Caliber Armor

Filters

Caliber Armor PRO Series IIIA-HG2 Shield